Seven Beverages broker used equipment all over the country. We have recently decommissioned an extraction facility designed and was slated to produce the THC & CBD extraction.
Everything listed below has been delivered, uncrated, but never used. Project ran out of money, so now we’re re-marketing the gear. Items are currently in storage in Orange County. It’s all really high quality and would be a good buy for anyone.
Please send offers to firstname.lastname@example.org
20 horsepower -50C Dynalene Chiller (American Made by G&D Chillers 480V). System is split, meaning main unit with compressors is separate from condensers so you don’t have to dump all that heat inside your building
Prescott P500 short path wiped film distillation unit with universal power transformer. 500 sq cm of evaporator surface area. Really high quality unit never even uncrated.
Cryogenic sterile filtering apparatus for inline winterization of miscella and aqueous solutions (beverage product) filtration. Stainless steel housings with stainless filter elements can be cleaned and renewed indefinitely. Porosity ranging from 50 micron down to .2 micron
CO2 monitor with remote sensors, alarms, and strobes. Guaranteed to give any fire marshal a compliance boner
Microfludizer by Microfluidics (30K PSI) The absolute best tool for creating shelf stable truly nano emulsions with the tightest distribution of particle size possible. The best of the best
Kaeser SM10 AirCenter with integrated dryer and receiver tank (480V). Cadillac of screw compressors. Tells you when it needs maintenance and makes a ton of CFM quietly.
Membrane contactor cart with dissolved oxygen metering onboard. We were using this to scrub oxygen out of the ingredients and process water down to the low PPB range. Can be used for all kinds of applications involving the scrubbing or infusing of gasses into liquids
10’ X 20’ C1D1 extraction booth by HAL Extraction. Setup for ethanol process, but just needs a sensor to be swapped for any other type of process (hydrocarbon etc.) Was setup, sealed, and then disassembled.
VFD cabinet with C1D1 control box. Contains three 1 HP 480V variable frequency drives inteded for pumps. Control box and cabinet together were designed to drive 3 electric centrifugal pumps and an air driven diaphragm pump.
Pall 18″ linticular filter housing, 3 elements tall. This piece we got used with some other equipment. Good condition, just needs the legs welded back on.
Two 20 cu ft -40C chest freezers. These were meant to pre-chill biomass in preparation for extractions (120V)
4000 GPD RO system with pressure switch. Included inline UV light for disinfection and algae control. Can be inexpensively upgraded to 12,000 GPD
Static mixer (2″ tri-clamp). For inline blending of media
96” SS prep table 35” H